Please call 01959 933 500
Contemporary StructuresContemporary StructuresContemporary StructuresContemporary Structures
  • Home
  • Our Services
    • Conservatories
    • Orangeries
    • Glass Extensions
    • Bi-Fold Doors
    • SupaLite Roof installations
    • Windows
    • Interior Design
    • Integral Blinds
    • LED Lighting Solutions
    • Conservatory Refurbishments
    • Doors
    • GRP Roofing
    • Maintenance
    • Specialist Structural Steelwork
    • Gutters and Downpipes
    • Fascias and Soffits
  • Our Company
  • Why Choose Us
  • Portfolio
  • Blog

Under Sink Bathroom Cabinet: Sizes, Trap Space and Fitting

Contemporary Structures 20 November, 2026

An under sink bathroom cabinet turns the dead space beneath a basin into storage, hides the trap and pipes, and can make a tired bathroom look newly fitted for far less than a full refit. The catch is that the space under a basin is never empty. A waste trap, two supply pipes and their valves all sit where you want shelves, so the cabinet that looks right online often fails on the day because nobody measured the plumbing. This page covers the measurements that matter, how to choose between a cabinet that fits round your existing pipework and one that needs the pipework changed, and the fitting details that stop the bottom of the unit swelling within a year.

We fit bathrooms across Kent, and the same three problems come up again and again with under-basin storage: the waste comes out of the wall too low, the isolation valves end up buried behind a back panel, and cut edges are left raw where water drips. All three are easy to avoid if you plan before you buy.

Table of Contents

Toggle
  • Measure the plumbing before you measure the wall
  • Three kinds of under sink cabinet
    • Cabinets that fit under an existing pedestal or wall-hung basin
    • Vanity units with the basin built in
    • Fitted or made-to-measure units
  • Common widths and depths
  • The trap: what the rules say and how to free up space
  • Keep the isolation valves reachable
  • Materials that survive a bathroom
  • Fitting an under sink cabinet properly
  • Frequently asked questions
    • Can I put an under sink cabinet under a pedestal basin?
    • What size under sink cabinet do I need?
    • Do I need a plumber to fit an under sink bathroom cabinet?
    • Why does my under sink cabinet smell?
    • Can I have drawers under a bathroom sink?
  • Related guides

Measure the plumbing before you measure the wall

Start with the pipes, not the space. Take these measurements with the basin in place:

  • Waste height: the height from the finished floor to the centre of the waste pipe where it leaves the wall or floor. A low waste is the most common reason a cabinet will not sit flush.
  • Waste position across the wall: the distance from the centre of the basin to the centre of the waste outlet. If it is off-centre, a cabinet with a central cut-out in the back panel will not line up.
  • Supply pipes: where the hot and cold pipes come out (wall or floor), how far apart they are, and where the isolation valves sit.
  • Trap depth: how far the trap hangs below the basin outlet and how far it projects from the wall. This decides whether a shelf or drawer can run underneath.
  • Basin footprint: width and depth of the basin itself, and for a pedestal basin, the width and depth of the pedestal foot.

Then measure the space: wall width between any obstacles, the distance to the bath, toilet or door swing, and whether skirting, a radiator pipe or boxing gets in the way. Our bathroom planner clearances page gives the room to leave in front of a basin so you can use it comfortably.

Three kinds of under sink cabinet

Cabinets that fit under an existing pedestal or wall-hung basin

These are freestanding units sold separately from the basin, usually with a U-shaped cut-out at the back or in the top so they slide around the pedestal or trap. They are the cheapest way to add storage without touching the plumbing. The limits: the cut-out has to clear your pedestal or trap, the top of the cabinet sits below the basin rather than supporting it, and the shelf inside is split or shortened around the cut-out. Check the stated cut-out size against your pedestal or trap measurements before ordering, not after.

Vanity units with the basin built in

A vanity unit is a cabinet and basin sold together, with the basin sitting on or set into the top. This is the most common choice in a refit because the cabinet is designed round a known waste position. It does mean removing the old basin and usually adjusting the waste and supply pipes to suit. Floor-standing and wall-hung versions each have trade-offs, which we cover in wall-mounted vs freestanding vanity units.

Fitted or made-to-measure units

Where a basin sits in an alcove, under a sloping ceiling or alongside boxing, a fitted unit built to the space uses every millimetre and can hide pipework that would otherwise need boxing in. It costs more and takes longer, but it is often the only way to get full-width drawers round awkward plumbing.

Common widths and depths

Ready-made under sink cabinets and vanity units are most often sold in widths around 400mm, 500mm, 600mm and 800mm, with larger double-basin units beyond that. Depths vary much more, and in a small bathroom or cloakroom the depth matters more than the width. A slimline unit of around 250mm to 300mm deep keeps the walkway clear in front of a toilet or shower, but it only works with a small or semi-recessed basin and leaves little room for the trap.

Always check two figures on the product sheet: the overall width including any overhanging top, and the internal depth once the back panel or cut-out is allowed for. Internal depth is what decides whether bottles stand upright behind the trap.

The trap: what the rules say and how to free up space

Every basin needs a trap to stop drain smells coming back into the room. The guidance for England, Approved Document H, gives a minimum trap diameter of 32mm and a 75mm depth of water seal for a washbasin. Whatever trap you choose has to keep that seal and stay accessible for clearing.

The trap is also the thing that eats your storage. The options, from most to least space taken:

  • Standard tubular P-trap: hangs straight down from the outlet before turning into the wall. Reliable and cheap, but it sits in the middle of the cabinet.
  • Bottle trap: more compact and neat if it is ever on show, and easy to unscrew for clearing. Still central.
  • Space-saving or offset traps: designs that take the waste back towards the wall at a higher level so a drawer can run underneath. Many drawer vanity units are sold with one, or with a cut-out in the drawer to suit.
  • Self-sealing waste valves: products such as Wavin’s HepvO use a membrane instead of a water seal, which suits tight spaces. Check the maker’s guidance on where it can be used before swapping.

If the waste comes out of the wall low, the cleanest fix during a refit is to raise it while the wall is open. Moving it higher lets the trap sit tight under the basin and frees the lower part of the cabinet for a full shelf. Avoid S-traps that drop straight into the floor with a long tail; they are more prone to losing their seal.

Keep the isolation valves reachable

The Water Supply (Water Fittings) Regulations require enough servicing valves for fittings to be maintained without draining the whole system. In practice that usually means an isolation valve on each tap supply under the basin. Once a cabinet goes in, those valves need to stay in reach: you will want them for a dripping tap, a new tap or a leak at the flexible connector.

Plan the back panel cut-out so the valves sit inside the cabinet, not behind it. If the supply pipes come up through the floor, make sure the cabinet base has a hole or slot where they enter rather than notching the pipes out of the way. A cabinet you have to unscrew from the wall to turn the water off is badly fitted.

Materials that survive a bathroom

The underside of a basin is the wettest place in a bathroom outside the shower. Splashes run down the front, condensation forms on cold supply pipes, and small leaks at connectors go unseen for weeks. Choose the carcass with that in mind:

  • Moisture-resistant MDF or chipboard with a sealed finish: the standard in mid-range units. Fine as long as every edge is sealed, including the ones you cut on site.
  • PVC or foam board units: do not swell when wet, which makes them a sensible choice for family bathrooms and rentals.
  • Solid timber: looks good and can be refinished, but needs a proper lacquer or oil and good ventilation.
  • Standard chipboard with a thin wrap: the cheapest and the first to blow at the base. Avoid it under a basin.

Whatever you buy, raise it off a wet floor where possible. Wall-hung units and cabinets on adjustable legs keep the base clear of mopping water and make leaks easier to spot. Good extraction helps too; our page on how to stop condensation in a bathroom covers fan sizing.

Fitting an under sink cabinet properly

  1. Turn off the isolation valves and check the tap no longer runs. Put a bowl under the trap before you disturb it.
  2. Dry-fit the cabinet against the wall and mark the trap and pipe positions on the back panel and base.
  3. Cut the openings with a hole saw or jigsaw, leaving a few millimetres of clearance round each pipe.
  4. Seal every cut edge with clear varnish, paint or edging tape. Raw board soaks up water and swells.
  5. Fix to the wall with fixings suited to the wall: plasterboard needs proper cavity fixings or, better, timber noggins behind. A wall-hung vanity carrying a ceramic basin needs solid support.
  6. Reconnect and test: fill the basin, pull the plug and watch every joint for a minute. Run the taps and check the connectors.
  7. Seal the basin to the wall with a bathroom silicone once the unit is level and fixed.

Frequently asked questions

Can I put an under sink cabinet under a pedestal basin?

Yes, if you buy a cabinet with a cut-out large enough to clear the pedestal foot, or remove the pedestal and fit a wall-hung basin with a cabinet beneath. Many pedestal basins rely on the pedestal for support, so check the basin is properly fixed to the wall before taking the pedestal away.

What size under sink cabinet do I need?

Match the width to the basin and the space, and check the depth against your walkway. Common widths are around 400mm to 800mm. The figures that decide whether it fits are the waste height and position, so measure those first.

Do I need a plumber to fit an under sink bathroom cabinet?

A freestanding cabinet that fits round existing pipes is a straightforward DIY job. Swapping to a vanity unit usually means disconnecting the basin, trap and taps, and often moving the waste, which many people leave to a plumber.

Why does my under sink cabinet smell?

Usually because the trap has lost its water seal, a joint is weeping, or damp has got into the board. Check the trap is full and tight, and look for swelling at the base. Our page on why a bathroom smells like sewage goes through the causes.

Can I have drawers under a bathroom sink?

Yes. Drawer vanity units use a cut-out in the top drawer or a space-saving trap that runs back to the wall. Check the waste height first; a low waste can rule out a full-depth top drawer unless it is raised.

Planning a new bathroom in Kent? See more of our guides and projects at Contemporary Structures.

Related guides

  • Conservatory Roof Replacement vs Glass Film: Which Fixes a Too-Hot, Too-Cold Conservatory?
  • Air Source Heat Pump Cost in 2026 After the £7,500 Grant: What You Actually Pay
  • Do You Need Planning Permission for a Rear Extension in Kent? 2026 Permitted Development Rules
  • How Much Does a Conservatory Base Cost in the UK? (2026 Price Guide)
  • Do You Need a Party Wall Agreement for a Rear Extension? Cost and Rules Explained
  • Underfloor Heating vs Radiators for a Home Extension: Cost, Running Bills and Which to Choose
  • How Much Does a House Extension Cost in 2026? Full UK Price Breakdown
  • Loft Conversion Cost and Types: Dormer, Hip-to-Gable and Velux Explained
  • Kent Home Improvement News: June 2026
  • House Extensions: The Complete UK Homeowner's Guide
  • Single Storey Extension Ideas, Costs and Planning Rules
  • Double Storey Extensions: Costs, Designs and What You Can Build
  • Side Return Extensions Explained: Cost, Light and Layout
  • Kent Home Improvement News: Mid-June 2026
  • Garage Conversion Guide: Cost, Building Regs and Best Uses
  • Extension vs Moving House: Which Is Better Value in Kent?
  • Wraparound vs Rear Extension: Cost and Space Compared
  • House Extension Builders in Kent: Costs, Lead Times and How to Choose
  • Conservatory Guide: Styles, Costs and How to Choose One
  • Kent Home Improvement News: Late June 2026
  • How Much Does a Conservatory Cost in 2026? UK Prices by Type
  • Conservatory vs Orangery vs Extension: Which to Build?
  • Conservatory Roof Options: Glass, Polycarbonate and Tiled Compared
  • Kent Home Improvement News: Early July 2026
  • How to Keep a Conservatory Warm in Winter and Cool in Summer
  • Tiled Conservatory Roof Cost and Replacement Process Explained
  • Conservatories in Kent: Choosing an Installer, Costs and What to Ask
  • Kent Home Improvement News: Mid-July 2026
  • Roofing Guide: Repairs, Replacement, Materials and Costs
  • New Roof Cost UK 2026: Replacement Prices by Roof Type
  • Roof Repair Cost UK 2026: Slipped Tiles and Flashing Prices
  • 7 Signs Your Roof Needs Replacing (and What You Can Ignore)
  • Flat Roof vs Pitched Roof: Cost, Lifespan and Best Uses
  • EPDM vs Felt vs Fibreglass Flat Roofs Compared
  • Kent Home Improvement News: Mid-July 2026
  • Roof Tile Types Explained: Clay, Concrete and Slate Compared
  • Fascias, Soffits and Guttering: When to Replace and What It Costs
  • How to Find a Good Roofer: Vetting Checklist for UK Homeowners
  • Roofers in Kent: Costs, How to Choose and What to Ask in 2026
  • Kitchen Renovation Guide: Planning, Cost and Design in 2026
  • How Much Does a New Kitchen Cost in 2026? UK Price Guide
  • Kitchen Layout Ideas: Galley, L-Shape, Island and Open Plan
  • Worktops Compared: Quartz vs Granite vs Laminate vs Solid Wood
  • Fitted vs Bespoke vs Flat-Pack Kitchens: Cost and Quality
  • Kitchen Island Ideas, Sizes and Costs: A 2026 UK Guide
  • Kent Home Improvement News: Late July 2026
  • Open Plan Kitchen Diner: Costs, Layouts and Knock-Through Rules
  • How Long Does a Kitchen Fitting Take? Realistic UK Timeline
  • Kitchen Fitters in Kent: Costs and How to Choose (2026)
  • Bathroom Renovation Guide: Planning, Cost and Layout
  • New Bathroom Cost 2026: What You'll Pay in the UK
  • Kent Home Improvement: Roofing Costs Rise (Aug 2026)
  • Small Bathroom Ideas: Layouts That Feel Bigger
  • Wet Room Cost 2026: £2,000 to £9,000 Fitted, by Size
  • En Suite Cost and Minimum Size: £4,000 to £10,000 in 2026
  • Kent Home News: £9,000 Heat Pump Grant Now Open
  • Electric vs Mixer vs Power Shower: What Your Boiler Allows
  • Bathroom Underfloor Heating Cost: 16p an Hour to Run
  • Window Replacement Cost 2026: £350 to £600 Per uPVC Window
  • uPVC vs Aluminium Windows: the 1.4 U-Value Rule
  • How Long Does a Bathroom Take to Fit? 5 to 10 Working Days
  • Home Improvement News: Solar Up 14%, Heat Pumps Down 17%
  • Double vs Triple Glazing: Part L Still Stops at 1.4
  • Bathroom Fitters in Kent: What to Ask Before You Pay
  • Sash Window Repair or Replace? What Kent Councils Allow
  • Bifold vs Sliding Doors: What Building Regs Actually Set
  • Composite Door Cost 2026: £550 to £2,350 Fitted
  • Window Energy Ratings: Band B Is the Rule, Not C
  • Replacement Windows: the 1.4 U-Value and Vent Rules
  • Double Glazing Kent: the 1.4 U-Value Every Quote Must Hit
  • Heat Pumps in Kent: the £7,500 Grant and the 1.5m³ Rule
  • Heat Pump vs Gas Boiler: Break-Even Is a SCOP of 3.0
  • Permitted Development Rights: The 8m Rear Extension Rule
  • Air Source vs Ground Source Heat Pump: £13k or £26k?
  • Kent Home News: Council Merger Paused, Heat Pump Bids Up 81%
  • Building Regulations Approval: Kent Fees, 10-Year Rule
  • Boiler Upgrade Scheme: £9,000 Grants From 21 July 2026
  • New Boiler Cost 2026: £1,800 to £4,500 Fitted
  • Do Heat Pumps Work in Old Houses? Yes, With 3 Conditions
  • Heat Pump Installers in Kent: 8 Checks Before You Sign
  • House Rendering in Kent: When the Wall Must Be Insulated
  • What Is TrustMark? The Kent Trade Badges That Count
  • Home Improvement Grants in Kent: ECO4 Ends 31 December
  • Kent Home News: Heating Oil to Be Regulated, £9,000 Grant
  • Conservation Area Planning Rules: The 3m Rear Limit
  • How to Apply for Planning Permission in Kent: £548, 8 Weeks
  • Best Kitchen Cupboard Paint: Match It to the Door Surface
  • Should You Pay Builders a Deposit? How Much, and How
  • Porch Planning Permission: The 3m² Rule and When It Fails
  • Black Kitchen Ideas: Matt or Gloss, and the Light It Needs
  • Navy Kitchen Ideas: Hague Blue vs Stiffkey and What Pairs
  • White Kitchen Ideas: Warm or Cool White, and What Pairs
  • Sage Green Kitchen: 8 Farrow & Ball Shades and Pairings
  • Grey Kitchen Ideas: 9 Farrow & Ball Greys and What Pairs
  • Oak Kitchen Ideas: Solid vs Veneer, Oil Care, 4 Colour Pairs
  • Galley Kitchen Ideas: The 1.2m Aisle Rule and 5 Layout Fixes
  • Kent Home News: Heat Pump VAT Returns to 5% in April 2027
  • Farmhouse Kitchen Ideas: Sink, Range and 6 Paint Colours
  • U-Shaped Kitchen Ideas: 2.4m Minimum Width and Corner Fixes
  • Kitchen Window Ideas: 7 Layouts and the 800mm Glass Rule
  • Kitchen Shelves: Heights, Brackets and Plasterboard Loads
  • Kent Home News: Plan to Scrap the Gas Standing Charge
  • Kitchen Extension Ideas: 7 Layouts and the 3m Planning Rule
  • Walk In Bathroom Shower Ideas: Trays, 8mm Glass and Fans
  • Bathroom Sink Buying: 6 Basin Types, Tap Holes and Wastes
  • Bathroom Floor Tiles: Slip Ratings, Sizes, Subfloor Checks
  • Bathroom Cladding: PVC, Acrylic or Laminate Over Tiles?
  • Black Bathroom Ideas: 4 Farrow & Ball Blacks and What Pairs
  • Bathroom Worktops: 6 Materials, Which Suit Undermount Sinks
  • Tall Bathroom Cabinets: Sizes, Fixing and Where They Fit
  • Sealant Strip for Bathroom Joints: When It Beats Silicone
  • Bathroom Planner: Clearances, Zones and Fan Rates to Use

Please call 01959 933 100
Enquires at
Contemporary Structures
366 Main Road Biggin Hill, Kent TN16 2HN
Email:


Checkatrade information for Contemporary Structures (Part of the All Seasons Group Ltd)

Contemporary
Structures
  • Conservatories in Kent
  • Conservatories Kent
  • Kent Orangeries
  • Orangeries Kent
  • Bi-Fold Doors Kent
Privacy Policy Cookies Policy Disclaimer Sitemap

Copyright © 2026 by Contemporary Structures. All rights reserved. Website created by Make Me Local.

  • Home
  • Our Company
  • Why Choose Us
  • Meet The Team
  • Products
    • Conservatories
    • Orangeries
    • Glass Extensions
    • Bi-Fold Doors
    • Celsius Solid Roof installations
    • Windows
    • Interior Design
    • Integral Blinds
    • LED Lighting Solutions
    • Conservatory Refurbishments
    • Doors
    • GRP Roofing
    • Maintenance
    • Specialist Structural Steelwork
    • Fascias and Soffits
    • Gutters and Downpipes
  • Portfolio
  • Trade Enquiries
  • Testimonials
  • Showroom
  • FAQ’s
  • Recruitment
  • Loyalty scheme
  • Contact
Contemporary Structures

We are using cookies to give you the best experience on our website.

You can find out more about which cookies we are using or switch them off in .

Conservatories Kent Contemporary Structures
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.

Cookie Policy

More information about our Cookie Policy